Page Tree
Other Releases
Summary Information
Communication Driver Name: TSimulator - SCADA Random Values
Current Version: 1.0.0.0
Implementation DLL: T.ProtocolDriver.TSimulator.dll
Channel Configuration
Protocol Options
Not used in this driver
Node Configuration
Not used in this driver
Point Configuration
The syntax for the TSimulator communication points is: <Type>:<Min>;<Max>
Where:
Type: Represents the Simulation Type:
- BOOL
- INTEGER
- FLOAT
- STRING
- RAMP
- SINE
For the STRING simulation type, the StringLength can be configured in the Modifiers column
Example Points Configuration
| TagName | Node | Address | DataType | AccessType | Modifiers |
|---|---|---|---|---|---|
| MySine | SimulatorNode | SINE:-50;50 | Native | Read | |
| MyRamp | SimulatorNode | RAMP:0;100 | Native | Read | |
| MyString | SimulatorNode | STRING: | Native | Read | StringLength=5 |
| MyBool | SimulatorNode | BOOL: | Native | Read | |
| MyInt | SimulatorNode | INTEGER:0;10 | Native | Read | |
| MyFloat | SimulatorNode | FLOAT:-500;-100 | Native | Read |
Troubleshoot
The status of the driver's execution can be observed through the diagnostic tools, which are:
• Trace window
• Property Watch
• Module Information
The above tools indicate if the operations have succeeded or have failed. A status of 0 (zero) means communication is successful. Negative values indicate internal driver errors, and positive values indicate protocol error codes.
Overview
Content Tools
Tasks