Integrate directly with PLCs, sensors, and edge controllers.
Connectors → Standard | Vertical | Automation | Factory | Databases | IT
Administration Management System Connector
- Name: AMSXE
- Version: 1.1.0.0
- Protocol: Proprietary
Aesys VerbaInfo Service Connector
- Name: VerbaInfo
- Version: 1.0.0.4
- Protocol: Proprietary
ASCII Barcode Reader Connector
- Name: Barcode
- Version: 1.0.3.0
- Protocol: ASCII Generic
ASCII Master Generic Connector
Devices compatible with ASCII Protocol
- Name: ASCII
- Version: 2.0.0.8
ASCII Slave CSV Connector
Devices using ASCII CSV format
- Name: ASCIISlaveCSV
- Version: 1.0.0.9
Automation Direct Koyo Connector
Automation Direct (PLC Direct/Koyo)
- Name: Ecom
- Version: 1.2.2.0
Bailey INFI90 DCS Connector
INFI 90 Distributed Control Systems
- Name: Bailey
- Version: 4.0.1.0
Cincinnati Test Systems Sentinel I28 Connector
Cincinnati Test Systems Sentinel I28 devices
- Name: Cincinnati
- Version: 1.1.0.0
Control and Display Unit CDU Connector
Device compatible with CDU Protocol
- Name: CDU
- Version: 1.0.0.0
CST CSI Server Connector
Devices compatible with CST Protocol
- Name: CSI
- Version: 1.0.0.8
CTC 5300 Model Connector
5200 controller or compatible devices
- Name: CTC
- Version: 3.0.0.1
DanLoad 6000 Daniel Flow Equipments Connector
DanLoad6000 driver implements communication with Daniel Measurement and Control on TCP/IP or serial networks.
- Name: DanLoad6000
- Version: 1.0.2.0
DanLoad 8000 Daniel Flow Equipments Connector
DanLoad8000 driver implements communication with Daniel Measurement and Control on TCP/IP or serial networks.
- Name: DanLoad8000
- Version:1.0.0.4
Desoutter CVIC II Connector
Devices compatible with CVIC II equipments
- Name: Desoutter
- Version: 1.1.0.0
eWON Synchronization Connector
EWon systems
- Name: EWon
- Version: 2.0
Fatek Facon PLCs Connector
Devices using Facon Protocol
- Name: Facon
- Version: 1.0
GeFanuc SRPT Connector
Series 90 PLC and compatibles
- Name: GEFanucEthernet
- Version: 1.1.7.0
Genisys and Microlok Plus Connector
Genisys devices
- Name: Genisys
- Version: 1.3.3.8
IPC Filmex and Varex Extrusion Connector
Filmex and Varex Extrusion
- Name: IPC
- Version: 1.0.0.8
LCP Interface Control Connector
Local Control Panels (LCP)
- Name: LCPIC
- Version: 1.0.0.1
NI Labview Data Sockets Connector
This document has only the specific information about the device connection settings and its address syntax.
Summary
NIDataSockes communication driver implements communication with National Instruments softwares, including LabView and others which are compatible with the National Instruments Data Sockes interface.
NI Labview Legacy Connector
The Labview driver was developed to communicate with Labview software from National Instruments, specially with TLS security.
Summary
Communication Driver Information |
|---|
Raspberry PI GPIO Connector
RaspberryPI Revision 1 and 2
- Name: RaspberryPI
- Version: 1.1
Reliance CP3000 Connector
- Name: Reliance
- Version: 1.2.8.0
- Protocol: Proprietary
TTS08 SD50 Server Connector
TTS08 family devices
- Name: TTS08
- Version: 1.1.0.1
WDS DataStream Connector
Genisys devices
- Name: WDSDataStream
- Version: 2.0.0.0
In this section...