...
Communication Driver Information | |
|---|---|
Driver name | MitsubishiFXSerial |
Assembly Name | T.ProtocolDriver.MitsubishiFXSerial |
Assembly Version | 1.0.1.0 |
Available for Linux | False |
Devices supported | FX3U |
Manufacturer | Mitsubishi |
Protocol | Proprietary |
PC Requirements | Standard Serial Port |
...
Supported Operands
Operand | Read | Write | Data Type | Address size |
D - Data register | Yes | Yes | Word | 2 bytes |
TN – Timer Current value | Yes | Yes | Word | 2 bytes |
TS – Timer Contact | Yes | No | Bit | 1 bit |
CN – Counter Current value | Yes | Yes | Word | 2 bytes |
CS – Counter Contact | Yes | No | Bit | 1 bit |
X - Input relay | Yes | No | Bit | 1 bit |
Y - Output relay | Yes | Yes | Bit | 1 bit |
M - Internal relay | Yes | Yes | Bit | 1 bit |
S0 - Annunciator | Yes | Yes | Bit | 1 bit |
...
Channels Configuration
Protocol Options
Maximum size of blocks: Defines the maximum of addresses in a read block.
...
- Com – Define the Port of communication
- Baud Rate – Define the rate at which information is transferred in a communication channel.
- Databits – Define the number of data bits in each character
- Parity – Define the method of detecting errors in transmission.
- Stop bits – Define the stop bits.
- DTR – Define a control signal in RS-232 serial communication.
- RTS – Define the Request to Send
- CTS – Define the Clear to Send
- CtsWait – Time in milliseconds
...
Nodes Configuration
Primary Station
- SlaveID: The default is 1.
...
Points Configuration
The syntax for the Mitsubishi FX Serial communication points is: <Operand> <Address>
...
Note: The Y Operand is an Octal Numeral System.
...
Driver Revision History
MitsubishiFX_Serial Revision History | |
|---|---|
Version | Notes |
1.0.1.0 | Initial release on new documentation standards |
...