WITS servers outputting Level 0 data streams
Driver Name: WITS0Passive
Version: 1.0.12.0
Multiplatform runtime
Modules: Device
Manufacturer: n/a
Protocol: WITS Level 0 Passive
Interface: TCP/IP, UDP or RS232
On This Page
This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Overview
WITS0Passive communication driver implements communication with server running WITS Level 0 communication. This driver runs only in listening information from the server.
Communication Driver Information
Driver name
WITS0Passive
Assembly Name
.
ProtocolDriver.WITS0PassiveAssembly Version1.0.12.0
Available for Linux
False
Devices supported
WITS servers outputting Level 0 data streams
Manufacturer
Protocol
WITS Level 0 Passive
Interface
TCP/IP, UDP or RS232
Multi-threading
User defined
Max number of nodes
User defined
PC Requirements
Ethernet port
| Info | ||
|---|---|---|
| ||
| This driver supports any tag defined on target system. |
Module Configuration
This document has only information about the device connection settings and its address syntax.
For further Information, see:
Channels Configuration
Settings
- AcceptUnsolited Messages: Must be checked to enable this driver
- Listening Port: Listening port the TCP or UDP messages
Nodes Configuration
Address
The address is necessary, as this driver works in listening mode only. When connecting to multiple devices, multiple channels shall be defined.
Points Configuration
The syntax for the communication point is: RecordID:ItemID
Where:
- RecordID and ItemID ranges from 01 to 99, according WITS Level 0 record definition: http://home.sprynet.com/~carob/ - recs
Driver Revision History
WITS0Passive Revision History | |
|---|---|
Version | Notes |
1.0.12.0 | Initial release on new documentation standards. |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|