| Page properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
Devices using ASCII CSV format
- Name: ASCIISlaveCSV
- Version: 1.0.0.9
- Protocol: ASCII Slave CSV
- Interface:TCP/IP
- Runtime: Multiplatform
- Configuration:
- Devices / Protocols
On This Page:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Overview
ASCII driver implements communication with any device using ASCII protocol on TCP/IP following the CSV format
Communication Driver Information | |
|---|---|
Driver name | ASCIISlaveCSV |
Assembly Name | T.ProtocolDriver.ASCIISlaveCSV |
Assembly Version | 1.0.0.9 |
Available for Linux | False |
Devices supported | Any device using ASCII protocol on TCP/IP following the CSV format |
Manufacturer | n/a |
Protocol | ASCII |
PC Requirements | Ethernet port |
Channel Configuration
Settings
AcceptUnsolicited = must be set to enabled.
Node Configuration
Station Configuration
- Station syntax: <IP address> ; <Port number>
Where :
<IP address> = IP address of the slave device in the ASCII network
<Port number> = TCP port where the slave device is listening (default is 10001)
E.g.: 192.168.1.101 ; 10001
Points Configuration
The syntax for the communication points is: <Position>or DATE or TIME
Where:
<Position> indicates CSV position data in the row.
Example:
5
To read the Date or the Time from TimeStamp message, configure the Point Address with:
DATE or TIME
Driver Revision History
| ASCIISlaveCSV Revision History | |
|---|---|
| Version | Notes |
| 1.0.0.9 | Initial release on new documentation standards |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|