Page History

The Drawing tab has the following controls to create, format, and configure displays:

Vertical toolbar—On the left side of the Drawing tab. Use these buttons to draw shapes, add buttons, and create special windows. For more information, see Table 1.
Horizontal toolbar—Across the bottom of the Drawing tab. Use these buttons to group, combine, align, and lock the selected objects. For more information, see Table 2.
Appearance, DisplaySettings, and other settings—Below the main menu buttons, these settings vary based on the type of object selected.

To configure dynamic graphic displays,

from the Main Menu,

click on the "Draw" icon in the main menu.

The Appearance parameters dictate the brush style and color used when drawing objects in the display

, including colors

. Clicking on the Fill option lets you specify

Colors

the colors, gradients, or objects with which to fill the graphic.

The DisplaySettings dictate the attributes of the display. Displays can be configured as Pop Ups, Dialogs, or as normal page displays.

Like with any graphical object, displays can have varying colors and patterns, borders, titles

and more

etc.

One special feature is that you can specify that a transition animation

to use

is used when entering the display

much like you have in PowerPoint presentations

.

In this section... Page TreerootDisplays and Symbols

Vertical toolbar commands


Commands	Description
Image Modified Selection Tool	Click on an object to select it. CTRL+click

to select

selects multiple objects

(

and object groups

), one at a time

. Hold down the CTRL key as you click on each object.
Shift+click to

toggle selected

choose a main object from

among more than one

a group of selected objects

.

Click in an open area of the display

then

and highlight several elements to select a group of

elements by highlighting the elements while holding down the left mouse button.

elements
Double-click on an object to open the "Dynamics

Configuration

configuration" window

, which

that provides settings for dynamic object properties.
Image Modified Direct Selection Tool	Use this tool to select an object inside a group

(

and modify its properties

)

. Click on the object once to select it.
You can also add, remove, and modify the points in a Polyline with the Direct Selection Tool

:

.
- To move the point, click on the point to select it

by clicking the point and holding

- and hold down the left mouse button

down

- . Drag the point to its new position.
- Double-click on a point to add a new point adjacent to the selected point.
- Right-click on a point to delete the selected point.

Image Modified Hand Tool

Use the Hand Tool

The Hand tool can be used to modify the view window

by clicking

. Click once on the display background and

holding

hold down the left mouse button

then

. Then, shift the display to the desired position.
Geometric objects tools	Right-click to end the use of each tool. To add, modify, and/or remove points after creating a polygon or polyline, use the Direct Selection Tool.
Image Modified Rectangle	Creates a rectangle object.
Image Modified Ellipse	Creates an ellipse object.
Image Modified Polygon	Creates a polygon object.
Image Modified Polyline	Creates a polyline object.
Image Modified Button	Creates a button object.
Image Modified LabelBox	Creates a label box.
Image Modified Text Output	Creates a text output object.
Image Modified Text Box	Creates a text input/output (I/O) object. To link the

text

I/O object with a tag, double-click the

text

I/O object

, under

. Under the Dynamic configuration window, select the TextIO dynamic.
Image Modified CheckBox	Creates a check box object. Right-click this button to access the following tools: Image Modified Creates a radio button object. Image Modified Creates a combo box. Image Modified Creates a list box. Image Modified Creates a password box. Image Modified Creates a menu item. Image Modified Creates a date picker. Image Modified Creates a date/time text box. Image Modified Creates a slider control. After selecting a tool from this menu, it becomes the default tool for that button in the vertical toolbar.
Image Modified Open Symbol Library	The symbol library includes both built-in and user-defined symbols.
Image Modified Open Symbol Factory	The Symbol Factory is an external symbol library that contains a lot of symbols

precreated

created to be used

on

in the projects.
Image Modified Insert Image Resource	Insert an image to be used

on

in the

entire

project.
Image Modified Web Browser	Creates a Web Browser object. Hover over this button to access the following tools: Image Modified Creates a Report Viewer object. Image Modified Creates an XPS Viewer object. Image Modified Creates a PDF Viewer object. Image Modified Creates a Page Selector object. Image Modified Creates an Assets component. Image Modified Creates a Remote Assets component. Image Modified Creates a Child Window object. Image Modified Creates an external WPF component. After you click the option "Creates an external WPF component", the following components will be available: Image Modified Creates a Pie Chart object. For more information, see Configuring a Pie Chart. Image Modified Creates a Map Control object. Image Modified Creates a Report Preview object. Image Modified Creates a Calculator object. Image Modified Creates a Bar Chart object. For more information, see Configuring a Bar Chart. Image Modified Creates an Advanced Pie Chart object. Image Modified Creates a 3D Pipe Viewer object. Image Modified Creates a Circular Panel object. For more information, see Configuring a Circular Panel. Image Modified Import external dlls. After selecting a tool from this menu, it becomes the default tool for that button in the vertical toolbar.
Image Modified Alarm Window	Creates an alarm window. Position the alarm window and double-click to configure the alarm window settings. For more information, see Configuring an Alarm Window below.
Image Modified Alarm Area	Creates an Alarm Area control

,

that

allows to

lets you view the existing alarm tree.
Image Modified Trend Window	Creates a trend window. Position the trend window and double-click to configure the trend window settings. For more information, see Configuring a Trend Window below.
Image Modified Drilling Chart	Creates a drilling chart trend window. Position the trend window and double-click to configure the trend window settings. For more information, see Configuring a Trend Window below.
Image Modified DataGrid Window	Creates a data grid window. Position the data grid window and double-click to configure the data grid window settings. For more information, see Configuring a DataGrid Window below.

Horizontal toolbar commands


Commands	Description
Image Modified	Grid definition
Image Modified	Screen Zoom
Image Modified	Group
Image Modified	Ungroup
Image Modified	Union
Image Modified	Intersect
Image Modified	Exclude
Image Modified	Exclusive-Or
Image Modified	AlignLeft
Image Modified	AlignHorizontalCenter
Image Modified	AlignRight
Image Modified	AlignTop
Image Modified	AlignVerticalCenter
Image Modified	AlignBottom
Image Modified	Move To The Front
Image Modified	Move To The Back
Image Modified	Change Z-

Oder

Order
Image Modified	Resize Width
Image Modified	Resize Height
Image Modified	SpaceEvenlyHorizontal
Image Modified	SpaceEvenlyVertical
Image Modified	FlipHorizontally
Image Modified	Flip Vertically
Image Modified	Lock element
Image Modified	Unlock element
Image Modified	Unlock All Elements
Image Modified	Show All Elements
Image Modified	Hide Selected Element

Examples

Here you will see examples showing the functionality of the commands of the horizontal toolbar.

The shapes used can be any object without Dynamicsdynamics, like polygons, ellipses, or rectangles.

Union and Intersect

Exclude and Exclusive-Or

Lock element command. : Select both rectangles then click to lock. Now the rectangles can not be selected.
To unlock only one rectangle:
Click on the Direct Selection Tool command on in the vertical toolbar.
Select the on the desired rectangle and click on Unlock Element .
To Unlock all elements just , click on Unlock All Elements command .

Versions Compared

Old Version 1

New Version Current

Key