| Page properties | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
|
Connection with Kepware OPC Server - No Security
- Name: KepwareNoSecurity
- Version 1.0.0.0
- Protocol: OPC UA
- Interface: TCP/IP
- Runtime: Multiplatform
- Configuration:
- Devices / Protocols
On this page:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Overview
This page provides a detailed guide on how to establish a connection to Kepware without enabling security policies.It includes step-by-step instructions for configuring the necessary settings, disabling security features, and ensuring successful communication between the client and server
System Requirements
To use this feature, the following system requirements must be met.
:
- KepServerEx V5 (or higher).
- OPC UA ProtocolClient Connector
How to Use
The procedure for a successful OPC UA connection is divided into three main steps.
- KepServerEx OPC UA Server Configuration
- Creating certificates for Engineering and Runtime
- Importing client certificates on OPC UA
Steps to configure Kepware with no security
1 - Open KepServer and right-click on Project → 'Properties...' and configure the following settings.
2 - Right-click on the following icon in the hidden icons section of Windows and select OPC UA Configuration:
3 - In the 'Server Endpoint' tab, create or modify the preexisting settings as shown:
4 - Right-click on the same icon as in step 3 and select “Reinitialize”.
5 - Open the software, navigate to Channel section and create a new channel using the OPC UA Client Driver protocol.
6 - Go to Nodes section and create a new Node
7 - Click in PrimaryStation, select mark “Disable Security”. After that, Click test and you will see “Connected”
