This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
On this page:
Summary
| Communication Driver Information | |
|---|---|
| Driver name | Cincinnati |
| Assembly Name | T.ProtocolDriver.Cincinnati |
| Assembly Version | 1.1.0.0 |
| Available for Linux | False |
| Devices supported | Devices compatible with Sentinel I-28 precision leak test instrument. |
| Manufacturer | Cincinnati Test Systems |
| Protocol | Proprietary |
| Interface | RS232 or RS485 |
| PC Requirements | Serial port |
Channels Configuration
Protocol Options
Not used in this driver.
The remaining channel configurations are standard according the description on the reference guide.
Nodes Configuration
Station Configuration
Not used in this driver.
Points Configuration
Address
The syntax for the Cincinnati communication point is: <Command>
- <Command>: It indicates that this specific command is associated with the specific Tag Name.
Command | Description |
P01Time | Time of Test #1 |
P01Date | Date of Test #1 |
P01Leak | Leak of Test #1 |
P01Loss | Loss of Test #1 |
P02Time | Time of Test #2 |
P02Date | Date of Test #2 |
P02Leak | Leak of Test #2 |
P02Loss | Loss of Test #2 |
P03Time | Time of Test #3 |
P03Date | Date of Test #3 |
P03Leak | Leak of Test #3 |
P03Loss | Loss of Test #3 |
Driver Revision History
| Cincinnati Revision History | |
|---|---|
| Version | Notes |
| 1.1.0.0 | Initial release on new documentation standards |
In this section...