WITS servers outputting Level 0 data stream
Driver Name: WITS0Pason
Version: 1.0.10.0
Multiplatform runtime
Modules: Device
Manufacturer: n/a
Protocol: WITS Level 0 Pason
Interface: TCP/IP, UDP or RS232
On This Page:
Overview
WITS0Pason communication driver implements communication with server running WITS Level 0 communication.
Module Configuration
This document has only information about the device connection settings and its address syntax.
For further Information, see:
Summary
WITS0Pason communication driver implements communication with server running WITS Level 0 communication.
Communication Driver Information | |
|---|---|
Driver name | WITS0Pason |
Assembly Name | T.ProtocolDriver.WITS0Pason |
Assembly Version | 1.0.10.0 |
Available for Linux | False |
Devices supported | WITS servers outputting Level 0 data streams |
Manufacturer | <<<< insert manufacturer >>>> |
Protocol | WITS Level 0 Pason |
Interface | TCP/IP, UDP or RS232 |
Multi-threading | User defined |
Max number of nodes | User defined |
PC Requirements | Ethernet port |
NOTE
This driver supports any tag defined on target system
Channels Configuration
Settings
No settings are needed.
Nodes Configuration
Address
The address is necessary, as this driver works in listening mode only. When connecting to multiple devices, multiple channels shall be defined.
Points Configuration
The syntax for the communication point is: RecordID:ItemID
Where:
- RecordID and ItemID ranges from 01 to 99, according WITS Level 0 record definition: http://home.sprynet.com/~carob/-recs
Driver Revision History
WITS0Pason Revision History | |
|---|---|
Version | Notes |
1.0.10.0 | Initial release on new documentation standards. |
In this section...