Mitsubishi Serie Q devices
- Name: MitsubishiQ
- Version: 1.0.6.0
- Protocol: MELSEC
- Interface: TCP/IP
- Runtime: Multiplatform
- Configuration:
- Devices / Protocols
On this page:
Overview
MitsubishiQ driver implements communication with Mitsubishi Serie Q devices on TCP/IP networks. The communications blocks are dynamically created according to the pooling cycle defined on the AccessType for each Device Point.
Channel Configuration
Protocol Options
- BlockSize: Defines the maximum amount of items per group, the default value is 255.
- Format: Defines the MELSEC protocol format, default value is 3E.
Node Configuration
Station Configuration
Station syntax: <IP address> ; <Port number>
Where :
- <IP address>: IP address of the Mitsubishi device in the network
- <Port number>: TCP port where the Mitsubishi device is listening (default is 5001)
E.g.: 192.168.1.101; 5001
Points Configuration
The syntax for the MitsubishiQ communication points is: <Operand><Address>
Where:
- <Operand>: indicates the memory area into the Mitsubishi device:
- <Address>: indicates address to communicate.
Operand | Description |
X | Input |
Y | Output |
M | Internal relay |
L | Latch relay |
B | Link relay |
F | Annunciator |
V | Edge relay |
SM | Special relay |
TS | Timer (contact) |
TC | Timer (coil) |
CS | Counter (contact) |
CC | Counter (coil) |
TN | Timer (present value) |
CN | Counter (present value) |
D | Data register |
R | File register |
SD | Special register |
E.g.: D500, Y05
Driver Revision History
MitsubishiQ Revision History | |
|---|---|
Version | Notes |
1.0.6.0 | Initial release on new documentation standards. |