Setup Server Autostart

Setup the Server to Start the Runtime

You can run the project in any of the following ways:

• You can start manually from the project list on FactoryStudio's main menu. To do this, right-click the project and select Run Project.
• You can start manually when you are configuring the project. To do this, go to Run > Startup and click Run Startup.
• You can start the project automatically, which is the best option for production environments. See below for the best way to do this:

To define a project so it will automatically start, use the configuration interface available in the project management tools that are located on the Server tab. 

We recommend that you manually start your project during its development and installation because an operator is needed during these stages. Automated startup is more suitable for the project when it is setup for production. 

The startup shortcut, a login option, should be used when testing a project or in scenarios where the project always run in the same Windows user profile. 

Use the Windows Service on production servers when you need different Windows users to login to the computer, while keeping the server side runtime components running at all times. 

We also support OPC client activation, in order to be in full OPC compliance, but we don't recommend its use, because, as a good practice principle, it is not desirable to allow the status of remote client connections to control whether a server side application is running.

The following sections will describe what those automated settings are doing in case, for some reason, you need to setup those startup settings without using the configuration tools. 

Using a Shortcut on Windows Startup

You can configure a Windows server to automatically start a project using a startup shortcut. The startup shortcut starts the application when a user logs in to Windows, and the application stops running when the user logs off of Windows.

This procedure is automatically executed by the system when the startup mode is selected, as described above. This section will explain how to manually setup those shortcuts.

The Project runtime startup is executed by the program TStartup.exe.

When using this example, make sure to change the installation path and version of FactoryStudio to the installation on your computer. 

The project is started from a command line window. The following command line parameters are available:

/project: Project Path and Name between double quotes
/username: (optional), username that will be used to start the server , if you do not specify, the user guest will be used.
/redundancy: indicates that the server redundancy is being used (requires ip1 and ip2)
/ip1: IP Address of the Primary FactoryStudio Server
/port1: TCP port of the Primary FactoryStudio Server
/ip2: IP Address of the Secondary FactoryStudio Server
/port2: TCP port of the Secondary FactoryStudio Server
/viewonly: indicates that the project is in view only mode
/wa: indicates that the project uses Windows Authentication

The modules that will be started are configured in the project, at Run > Startup.

Creating the shortcut

Go to Start > All Programs, right-click the Startup folder, and select Open.

• In the Startup folder, right-click and select New > Shortcut.
• In the Create Shortcut window, paste into the field that displays.
• If you are not using redundancy, delete the redundancy part of the text.

In the examples below, be sure to change the installation path and version of FactoryStudio to the installation on your computer.

• Type or paste the full command line, for example: "C:\Program Files\Studio\fs-8.1\TStartup.exe" /project:"C:\Studio Projects\Project1.tproj"
• Click Next.
• Enter a name for the shortcut.
• Click Finish.

When you restart the computer next, the project will start automatically. 

Using a Windows Service to Startup

You can configure a Windows server to automatically start a project when the computer starts using a Windows Service. The Windows Service starts the application as soon as the computer is powered on and the Windows Operating System starts, even if no user has logged in to Windows.

This procedure is automatically executed by the system when selected for startup mode, as described above. This section will explain how to set it up manually.

These methods do not start the client (user interface with the displays). To automate the client startup, see "Automatically Starting Windows Clients", below.

Use the Windows Service only on production servers that you are not using as engineering stations, and only if you need the ability to differentiate Windows users logging in while the project is running. 

The first several steps of the procedure below are required to let you set up the Windows Service.

To run your application as a Windows Service:

• Go to Info > Project > Redundancy.
• Enter or select the information, as needed.

• Next to the Server Command Line field, click Copy to Clipboard. This copies the read-only field that was populated based on the fields above it.
• Open a text file, paste, and continue the next steps in the file.
• If you are not using redundancy, delete the redundancy part of the text.
• At the beginning of the command line, enter or paste the full path to the FactoryStudio installation folder and put quotes around it. It should look something like this: "C:\Program Files (x86)\Tatsoft\FactoryStudio\fs-8.1\tStartup.exe"
• Before the "tproj" text, enter or paste the full path to the project. It should look something like this: /project:C:\FactoryStudio Projects\<project_name>.tproj

The whole command line should look something like this:

"C:\ProgramFiles(x86)\Tatsoft\FactoryStudio\fs-8.1\ tStartup.exe" /project:C:\Factory Studio Projects\ <project_name>.tproj /username:<username>

• Leave the text file open for later use.
• From the command line prompt, go to the <.NET Framework Install Path> and execute the following command:

installutil <InstallPath>\<fs-version>\TStartupAsService.exe 
Example: C:\Windows\Microsoft.NET\Framework\v2.0.50727>installutil C:\Program files\Tatsoft\FactoryStudio\fs-8.1\ TStartupAsService.exe

• Copy and paste the command you created in the text file.
• In the Windows Registry, set up the parameters on:

"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ TStartup\ImagePath" 
Example: "C:\\tatsoft\fs-8.1\TStartupAsService.exe" "/project:C:\FactoryStudio Projects\Project1.tproj"

• In the Windows Services (Administrative Tools), set "TStartup Service" to Automatic, so the selected project will start when the computer starts.