Overview

This page provides detailed instructions for setting up ExternalTags for the AB Rockwell ControlLogix/CompactLogix connection. By leveraging these ExternalTags, users can effortlessly interface with their AB Rockwell devices, specifically the ControlLogix or CompactLogix series. This guide allows for real-time data integration into your application, eliminating the need for manual tag creation.

On this page:

Configuration

Initiate the configuration process by navigating to Unified Namespace → ExternalTags Source and selecting AB Rockwell ControlLogix and CompactLogix devices.

  1. Initiating Setup: Click on the designated button to set up the AB Rockwell ControlLogix/CompactLogix ExternalTags. A new configuration window will appear.

  2. Selecting Device Model: Choose the specific model of your device from the dropdown list. Available options include "1756 - L8X", "Micro 850", for other ControlLogix or CompactLogix models, you can select "Others".

  3. Configuration Details:

    • MaxStringItemsPerBlock: Define the maximum number of string items per block.
    • WaitingBetweenMsgs: Specify the waiting time (in milliseconds or other units) between messages.
    • StringLegacy: Input the legacy string details or enable/disable the legacy mode (depending on its function).
    • IP: Enter the IP address of your AB Rockwell device.
    • Port: Provide the port number where your device is communicating.
    • Slot: Specify the slot number where your module is located.

  4. After filling in all the necessary configuration details, click on the "Connect" or "Save" button (whichever is applicable) to complete the setup.

  5. Test your connection with Test button.


Ensure all details are accurate for a seamless connection. If unsure about specific settings, refer to your device's documentation or seek expert advice.


In this section: