This document has only the specific information about the device connection settings and its address syntax.

Refer to the User Guide for more information on the  Device Module or on UNS TagProvider Connections..

Summary

Supported Operands

Channels Configuration

Protocol Options

• Maximum size of blocks: Defines the maximum of addresses in a read block.

Protocol Options

• Com – Define the Port of communication
• Baud Rate – Define the rate at which information is transferred in a communication channel.
• Databits – Define the number of data bits in each character
• Parity – Define the method of detecting errors in transmission.
• Stop bits – Define the stop bits.
• DTR – Define a control signal in RS-232 serial communication.
• RTS – Define the Request to Send
• CTS – Define the Clear to Send
• CtsWait – Time in milliseconds

Nodes Configuration

Primary Station 

• SlaveID: The default is 1.

Points Configuration

The syntax for the Mitsubishi FX Serial communication points is: <Operand> <Address>

Where :

• <Operand>: Represents the Device Memory :
• <Address>: Address number

Note: The Y Operand is an Octal Numeral System.

Driver Revision History