|
Barcode Reader compatible with ASCII encoding
On This Page:
Communication Driver Information | |
---|---|
Driver name | Barcode |
Assembly Name | T.ProtocolDriver.Barcode |
Assembly Version | 1.0.2.0 |
Available for Linux | False |
Devices supported | Any equipment compatible with ASCII encoding |
Manufacturer | N/A |
Protocol | Serial or TCP/IP |
Protocol Options | BlockSize, Start Char and End Char |
PC Requirements | Standard PC Ethernet interface board, RS485 or RS232 port |
Multi-threading | Only one instance per channel is allowed |
Max number of nodes | Onlye one Node should be used for each channel |
Serial and MultiSerial channels:
TCP/IP channels:
Serial and MultiSerial channels:
TCP/IP channels:
The PrimaryStation and the BackupStation should be blank.
The syntax for the Barcode communication points is: <Number of Bytes>
The value 0 (zero) means that the Tag will receive the whole message
E.g.: The message received was “ABCDXYZ”
Case1:
TagName | Address | Value |
TagA | 4 | ABCD |
TagB | 3 | XYZ |
Case2:
TagName | Address | Value |
TagC | 0 | ABCDXYZ |
Barcode Revision History | |
---|---|
Version | Notes |
1.0.2.0 | Initial release on new documentation standards. |