|
Cincinnati Test Systems Sentinel I28 devices
- Name: Cincinnati
- Version: 1.1.0.0
- Protocol: Proprietary
- Interface: Serial
- Runtime: .NET 2.0 (Multiplatform)
- Configuration:
- Devices / Protocols
On This Page:
Overview
Communication Driver Information | |
|---|---|
Driver name | Cincinnati |
Assembly Name | T.ProtocolDriver.Cincinnati |
Assembly Version | 1.1.0.0 |
Available for Linux | False |
Devices supported | Devices compatible with Sentinel I-28 precision leak test instrument. |
Manufacturer | Cincinnati Test Systems |
Protocol | Proprietary |
Interface | RS232 or RS485 |
PC Requirements | Serial port |
Channels Configuration
Protocol Options
Not used in this driver.
The remaining channel configurations are standard according the description on the reference guide.
Nodes Configuration
Station Configuration
Not used in this driver.
Points Configuration
Address
The syntax for the Cincinnati communication point is: <Command>
- <Command>: It indicates that this specific command is associated with the specific Tag Name.
Command | Description |
P01Time | Time of Test #1 |
P01Date | Date of Test #1 |
P01Leak | Leak of Test #1 |
P01Loss | Loss of Test #1 |
P02Time | Time of Test #2 |
P02Date | Date of Test #2 |
P02Leak | Leak of Test #2 |
P02Loss | Loss of Test #2 |
P03Time | Time of Test #3 |
P03Date | Date of Test #3 |
P03Leak | Leak of Test #3 |
P03Loss | Loss of Test #3 |
Driver Revision History
| Cincinnati Revision History | |
|---|---|
| Version | Notes |
| 1.1.0.0 | Initial release on new documentation standards |