|
5200 controller or compatible devices
- Name: CTC
- Version: 3.0.0.1
- Protocol: Proprietary
- Interface: TCP/IP and Serial
- Runtime: Multiplatform
- Configuration:
- Devices / Protocols
On This Page:
Overview
CTC driver implements communication with controller compatibles with CTC Binary Protocol.
Communication Driver Information | |
|---|---|
Driver name | CTC |
Assembly Name | T.ProtocolDriver.CTC |
Assembly Version | 3.0.0.1 |
Available for Linux | False |
Devices supported | 5200 controller or compatible devices |
Manufacturer | CTC |
Protocol | Proprietary |
Interface | TCP/IP and Serial |
PC Requirements | Ethernet port or RS232 serial port |
Supported Operands
Operand | Read | Write | Data Type | Address size |
R - Register | Yes | Yes | DWord | 4 bytes |
AO - Analog Output | Yes | Yes | Word | 2 bytes |
AI - Analog Input | Yes | - | Word | 2 bytes |
F - Flag | Yes | Yes | Bit | 1 bit |
DI – Digital Input | Yes | - | Byte | 8 bits |
DO – Digital Output | Yes | Yes | Byte | 8 bits |
Channel Configuration
Settings
Serial channels:
Default configuration for RTU mode :
- DataBits: 8
- StopBits: 1 if parity is used, 2 if no parity
Set the other fields according to your Serial port configuration
TCP/IP channels:
- NodeConnections: Defines the maximum number of parallel requests that will be sent to each node (asynchronous communication)
Node Configuration
Station Configuration
TCP/IP channels:
- Station syntax: <IP address>
Where :
- <IP address>: IP address of the slave controller
E.g.: 192.168.1.101
Point Configuration
The syntax for the CTC communication points is: <Type><Number>
Where:
- <Type> indicates the memory area, the valid values are:
- R for Register
- AO for Analog Output
- AI for Analog Input
- F for Flag
- DI for Digital Input
- DO for Digital Output
For more information about the valid types, see Supported Operands aforementioned.
- <Number> indicates the data address in the memory area, from 1 to 65535
E.g.: R10 (Type= Register, Number = 10)
Driver Revision History
CTC Revision History | |
|---|---|
Version | Notes |
3.0.0.1 | Initial release on new documentation standards. |