On This Page:

Overview

WITS0Passive communication driver implements communication with server running WITS Level 0 communication. This driver runs only in listening information from the server.

Module Configuration

This document has only information about the device connection settings and its address syntax.

For further Information, see:

• Devices & Field Communications (Concept)
• Devices Module (Reference)

Channels Configuration

Settings

• AcceptUnsolited Messages: Must be checked to enable this driver
• Listening Port: Listening port the TCP or UDP messages

Nodes Configuration

Address

The address is necessary, as this driver works in listening mode only. When connecting to multiple devices, multiple channels shall be defined.

Points Configuration

The syntax for the communication point is: RecordID:ItemID

Where:

• RecordID and ItemID ranges from 01 to 99, according WITS Level 0 record definition: http://home.sprynet.com/~carob/ - recs

Driver Revision History

In this section...